ABOUT US              PQ-365              RESOURCES              INTERNATIONAL               



image of grey street revo 2.0 4 wheel scooterVictory® Twin Specifications



CATEGORY SPECIFICATION
Model Number
S712
Weight Capacity
350 lbs.
Maximum Speed
5.7 mph
Ground Clearance
3” at mid-frame
Overall Length
46”
Overall Width
22.3”
Seat-to-Ground Height
23”-24.5”
Seat-to-Deck Height
17.5”-19”
Front Tire
3” x 9” solid
Rear Tires
3.5” x 10” solid
Suspension
N/A
Range Per Charge1,2
Up to 11.1 miles
Total Weight Without Batteries3
150 lbs.
Heaviest Piece When Disassembled3,5
55 lbs. (front section)
Standard Seating
Type: Foldable molded plastic
Weight: 27.5 lbs.
Material: Black Vinyl
Dimensions: 18” width, 17” depth
Drive System
Rear-wheel drive sealed transaxle with 24-volt DC motor
Dual Braking System4
Regenerative and electromechanical
Battery Requirements
Size: (2) U-1 standard
Weight U-1: 24 lbs. each
Size: (2) 40 AH (optional), Weight 40 AH: 32 lbs. each
Battery Charger
3-amp, off-board (U-1)
5-amp, off-board (40 AH)
Warranty Frame: lifetime limited;
Drivetrain: 2-year limited;
Electronics: 2-year limited;
Battery: 13-months
Notes:
1 Varies with user weight, terrain type, battery amp-hour (AH), battery charge, battery condition and tire condition. These specifications can be subject to a variance of (+/- 10%).
2 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of (+ or 3%).
3 AGM or gel cell type required.
4 Tested in accordance with ANSI/RESNA, WC Vol2, section 4 & ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Test conducted at maximum weight capacity.
5 Battery weight may vary based on manufacturer.
All specifications subject to change without notice. The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice. Speed and range vary with user weight, terrain type, battery charge, battery condition and tire pressure. Due to manufacturing tolerances and continual product improvement, length, width, turning radius and ground clearance can be subject to variance of + or – 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.